綜合佈線施工期間需注意什麼

綜合佈線系統複雜的就是維護，因此在施工階段清晰地做好出線的標識和走向，才能為後續的維護提供方面。

綜合佈線施工期間需注意什麼?

1.前端線頭必須做好標籤，尤其是面板標識，否則會對後續維護非常麻煩。

2.避免綜合佈線系統因施工期較長或工程現場潮濕，導致配線架標籤紙受潮無法書寫，建議使用號碼管或事先手寫標籤紙做好標識，方便日後維護時辨識。

3.關於交換機到配線架的跳線，大致與前端線頭一樣操作即可。

4.機櫃配線表打印出來後過塑，然後在一角打上圓孔，用扎帶穿好，方便以後維護。

5.如果光纖跳線從機會下調到別的機櫃，建議使用波紋管，並用扎帶固定在機櫃上。

6.盡量用角鋼做承重架，不要直接在地板上挖洞引線。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「綜合佈線施工期間需注意什麼」的內容，請瀏覽創世官網：http://livser***.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

What should be paid attention to during the construction of Structured Cabling?

1. The front end of the thread must be labeled, especially the panel identification, otherwise it will be very troublesome for subsequent maintenance.

2. To avoid the structured Cabling System due to the long construction period or the damp construction site, the distribution frame label paper is damp and unable to write. It is recommended to use the number tube or handwritten label paper in advance to make the mark, which is convenient for future maintenance.

3. Regarding the jumper from the switch to the patch panel, you can do it roughly the same as the front end.

4. After the wiring chart of the cabinet is printed out, plasticize it, then punch a round hole in one corner and wear it with a cable tie to facilitate future maintenance.

5. If the fiber jumper is lowered from the opportunity to another cabinet, it is recommended to use a corrugated pipe and fix it on the cabinet with a cable tie.

6. Try to use angle steel as the load-bearing frame, do not dig holes in the floor directly.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'What should be paid attention to during the construction of Structured Cabling?'，please visit : http://livser***.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235