哪些操作不當會造成光纖性能受損

與雙絞線相比，光纖相對會比較脆弱，因此施工過程需要格外小心，如果操作不當容易影響光纖網絡的性能。

哪些操作不當會造成光纖性能受損?

1.如果光纖切割時留下污跡或殘留碎粒，容易縮短點擊壽命，降低接頭的機械強度，增加額外損耗。

2.光纖的切割端面不夠平滑，在熔接過程中容易出碰斷的情況。

3.光纖熔接前若機器不進行校準，切割工具容易積累大量鈣物質，導致熔接效果不滿意。

4.光纖出現彎曲，會導致信號傳輸質量下降。

5.重複使用擦拭紙會污染到其他連接器，影響光纖信號傳輸，甚至會嚴重的後果。

6.安裝前不檢查和清潔連接器端面，會影響光纖網絡速度，還有機會帶來網絡故障。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「哪些操作不當會造成光纖性能受損」的內容，請瀏覽創世官網：http://livser***.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

What improper operations can cause damage to fiber performance?

1. If stains or residual debris are left when the optical fiber is cut, it is easy to shorten the click life, reduce the mechanical strength of the connector, and increase additional loss.

2. The cutting end face of the optical fiber is not smooth enough, and it is easy to break during the splicing process.

3. If the machine is not calibrated before optical fiber fusion splicing, the cutting tool is likely to accumulate a large amount of calcium material, resulting in unsatisfactory splicing effect.

4. The bending of the optical fiber will cause the signal transmission quality to decrease.

5. Repeated use of wiping paper will contaminate other connectors, affect optical fiber signal transmission, and even have serious consequences.

6. Failure to check and clean the connector end face before installation will affect the speed of the optical fiber network and may also cause network failures.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'What improper operations can cause damage to fiber performance?'，please visit : http://livser***.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235